A factory engineered and professionally assembled alternative energy power system with SW inverters mounted on a panel prewired and ready to install. Models can be configured for 120 or 240VAC power delivery up to 11kW in size, from battery banks of 12, 24, or 48 VDC with connections for generator and/or utility input, including all necessary AC and DC overcurrent protection devices required by the NEC with additional AC section. Xantrex power panels are complete, pre-assembled electrical systems that are NEC compliant as well as ETL listed to UL and CSA standards.These systems may cost a little bit more than the individual components, but will save you a lot of time and hassle during system installation and inspection.The SW Power Panel system comes ready for installation, pre-wired with the following: A factory engineered and professionally assembled alternative energy power system with SW inverters mounted on a panel prewired and ready to install. Models can be configured for 120 or 240VAC power delivery up to 11kW in size, from battery banks of 12, 24, or 48 VDC with connections for generator and/or utility input, including all necessary AC and DC overcurrent protection devices required by the NEC with additional AC section. Xantrex Power panel Inverter System Pure Sine wave utility grade power ¿ SW Series sine wave AC power inverter with high efficiency and bi-directional operation includes: 60 amp AC pass-thru power at 120VAC (/S = Single System) or 120/240VAC (/D = Dual System) Adjustable three stage, temperature compensated battery charging ¿ 175 or 250 amp DC disconnect breaker* ¿ 60 amp AC disconnect/bypass breaker in box* ¿ AC and DC wiring in conduit (battery cables not included)* ¿ Powder coated steel back-plate (40.0¿H x 43.0¿W x 1.0¿D) (inches) ¿ Battery Temperature Sensor* ¿ Inverter Conduit Box* ¿ Negative / Ground Bonding Block ¿ 500 amp/50mV shunt (for remote metering)

E-mail a friend about this item.

Return to Catalog