 |
 |
|
|
BAT DESULPHATOR 12-48V ADJUST STRENGTH
SKU: SCI45.7105
Sulphite crystals form when the battery charge is reduced and/or the discharge/ discharge cycles are not well suited for the battery. These sulphite crystals act as insulators to the flow of electricity in the battery, seriously degrading the capability of the battery to have electricity flow in it, reducing its charging and discharge capability.
Like most battery desulphators, this unit uses a sharp pulse of current forced into the battery suddenly to "jar" the sulphite crystals and cause internal resonances, both mechanical and electrical, to grind down the sulphite crystals that form so they can be re-combined into the battery acid.
For increased performance, this unit precisley controls the magnitude of the sharp pulse of current, which is adjustable by the user. This adjustment is important as no 2 batteries are the same and no 2 battery setups are the same. As well, battery desulphaters, as they work with current spikes, may interfere with equipment connected to the unit. This adjustment allow the user to taylor the both the current spike and at what voltage it is present.
Features
Single unit 12 to 48 V nominal systems
Adjustable pulse strength
0.0 Amp pulse to 10 amp pulse
LED to indicate unit operating
LED to indicate relative strength of battery
Adjustable on/off voltage
Can be adjusted to only operate when battery is near full.
EXTREMELY low draw
For more details, go to: http://www.solarconverters.com/product_frame.html
E-mail a friend about this item.
Return to Catalog
|
|
 |