SKU: 75.4161

20 vertical feet (6 m) at sea level -- subtract 1 ft. for every 1000 ft. altitude (1 m for every 1000 m). Pump should be mounted as close to the water source as possible. Filtration Requirement This pump CANNOT tolerate dirt. Water MUST be filtered to <10 microns using a disposable cartridge filter. If water is very dirty, prefilter it, improve the source, or consider a different pump. PV-Direct (non-battery) Requirements The rated power of the PV array must exceed the pump watts by 20% or more. A Linear Current Booster (controller) is required to function in varying light conditions (12V/24V: 5Amp, 8Amp, 15Amp, 48V: 10Amp) Solar Tracker (optional) to increase daily yield (40-55% in summer) Accessories Intake Strainer/Foot Valve with fine monel metal screen, stops course debris Inline 10 micron Filter (10-inch) uses standard drinking water cartridges Intake Filter/Foot Valve (30-inch) replaces Intake Strainer and Inline Filter (10 micron) with a single unit, best for lowering into a shallow well Spare Filter Cartridges (5 or 10 micron spun fiber) Dry Run Switch prevents battery drain and pump damage if water source runs dry Linear Current Boosters (LCB) for PV-Direct (12V/24V: 5Amp, 8Amp, 15Amp, 48V: 10Amp) Fittings 1300/1400 Series: 1/2 inch female pipe thread 2500/2600 Series: 3/4 inch male thread Dimensions (1300/2500-Series) 5.7 x 15.5 inches (14 x 39 cm) Weight 16 lbs (7 kg) Warranty 1 year against defects in materials and workmanship. Use of pump without 10 micron or less filter will void warranty.